BMW ICOM NEXT BMW Diagnostic Tools with 2024/3 SSD Plus Panasonic FZ G1 Tablet Ready to Work

Improved Functionality and Performance

1. Gbit workshop LAN, backwards compatible
2. Preparation for Gbit LAN on vehicle OBD(cars do not yet support this and interface not yet defined,ICOM Next hardware adaptation will be necessary for future Gbit car interface,will cause adaptation costs)
3. Faster start-up time and high throughput
4. Through high-performance, low-power ARM SoC
5. Improved handling
6. More flexible OBD cable
7. Lighted button for logs etc

ICOM NEXT ABC Specifications

Zeroization of data on tamper detection
Secure supply chain assurance
Key storage using physically un-clonable function
CRI Pass-Through DPA Patent Portfolio
Advanced cryptographic Services

BMW Software Compagible wirth ICOM Next A

ISPI NEXT—BMW ISPI NEXT is latest generation after service tool for BMW, these brief instructions describe the basic functions of the AIR application (Aftersales Information Research) in Service. For the Diagnostic, it use IPSI (Rheingold) and ISPI Next for Coding Programming functions.
ISTA/D— Integrated Service Technical Application Diagnostic. ISTA/D is used to diagnose BMW all series and models from all systems.
ISTA/P— Integrated Service Technical Application/Programming. ISTA/P is used to process all coded, programmed and enable-dependent control modules in BMW Group vehicles.
Rheingold—Diagnostic and repair guide, including Diagrams and disassembly Figure
KSD—BMW KSD (Kaufmännische Service Daten, i.e. Commercial Service Data) is a collection of invaluable data for determining labor hours, inspection sheets and general service methods. There’s also information about wheels and rims for the various models.
EasyConnect— Used to Configure the Environment Parameter of Engineer Software for E series, can activate or release ICOM Port
IToolRadar— Used to recognize ICOM, activate or release ICOM Port
ETK— Accessories Catalog
EDIABAS Tool32— Engineer Software for E series, able to run directly
INPA— Engineer Software for E series, for diagnosis
NCS Expert Tool—- Engineer Software for E series, for coding
WinKFP—Engineer Software for E series, for programming
E-sys — Engineer Software for F series (available for programming and coding)
BMW Standard tool
Coding Database
Coding Tool

How to use BMW ICOM NEXT?
1. connect the car with icom or icom a2;
2. connect the icom lan-cable with the computer when the system light stop flashing.Otherwise, the icom ista-p program will shut off automatically if you have firstly connected the device with the computer directly.
Expert Mode with NCS, E-SYS and so on
Eeay to install...only thing you need to do is insert it into laptop!!!
No need dongle
If you need to do programming job, please make sure your laptop has 4GB ram at least.

How to Update BMW ICOM NEXT Firmware?
First, install ISTA-D software on your system so you can use it to install the firmware on your ICOM.
Next, start ISTA-D with ICOM connected to your car (Don’t need KL15, KL30 13.8V on pin 16 and ground on 4+5 is enough)
Then, go to connection manager and start the update.

BMW ICOM NEXT Reviews:

ICOM Next is faster than the old bmw icom. It is also better built IMHO.
And 2017 Next is WIFI available also.
It handles multiprogramming and coding quite nicely.
Gets the job done much faster if flashing the complete vehicle.
Another benefit to Next will be compatibility for future cars.

System Requirements
Dual-core processor, better above I3; over 4G of memory

Support Model
It is recommended to use Lenovo ThinkPad: T61, T400, T410, T420, T430, X61, X200, X201, X220 X230 and other laptop with Intel chipset, such as I3 I5 / I7 series.

Software Advantage

1. Support Multi-language
2. Support almost 95% laptop on the world with Intel chip( I3/I5/I7 series) and have 4GB memory, we offer L enovo x200t, D ell d630
3. Software contain TIS and WDS software( for repair instruction and circuit).
4. Cancel USB Dongle, no need to worry anymore for losting usb dongle will shut down your software.
5. Provide bonus engineer software for free, you can use it to do single module programming.
6. Support Engineers programming

Software Function and Feature

1. Diagnose and programming is multi-language including circuit diagram information.
2. Support single programming and B M W engineers programming
3. The HDD has been updated to the newest R2 version, which boasts better efficiency, stability and performance than other R1 version HDDs
4. Different from other websites, we offer you an all new 500GB HDD rather than an old 160GB HDD

Specification for Panasonic FZ G1 Tablet PC

Condition: Used
An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended.
Brand: Panasonic
Type: Tablet
Screen Size: 10.1 inch
Memory (RAM): Intel(R)Core(TM)I5 CPU
Processor Configuration: Dual Core
Memory: 4GB

BMW ICOM NEXT Package Includes

1pc x BMW ICOM NEXT A+B+C
1pc x BMW ICOM B Most
1pc x BMW 20pin Cable
1pc x USB Cable
1pc x LAN Cable
1pc x OBD Cable
1pc x Optical Fiber
1pc x Latest BMW ICOM SSD
1set x FZ G1 Tablet