mercedes star software,
mercedes benz diagnostic software
Benz W211/R230 ABS/SBC TOOL (Repair Code C249F)
-Repair though OBDII, no need to open ABS assembly! Easy to operate!
1. Using the battery without external power supply.
2. LCD-screen with instruction , easy operation
3. Efficient repair, 3 seconds
1. Directly through the OBD-11 repair SBC internal computer fault code C249F, no need to open ABS assembly, convenient and quick fix SBC completed within 10 seconds of data, a key to complete the operation.
2. SBC to repair the data first four models: 25% -50% -70% -100% user choice.
3. Can use of SBC and use fixed number of year return to zero, clear the fault code C249F maintenance reached the limit, do not have to replace the SBC brake system!
If using DAS to check and diagnose the ABS/SBC system in Mercedes Benz's W211 and R230, there is a faults showed: CODE C249F, OPERATION TIME OF COMPONENT A7/3 IS EXCEEDED (SBC HYDRAULIC UNIT)
The above hints mean OPERATING TIME OF COMPONENT is exceeded, it's necessary to replace new SBC HYDRAULIC UNIT; no need extra HYDRAULIC UNIT if with W211/R230 tool
BOSCH NR: 0 265 960 012
BOSCH NR: 0 265 960 013
BOSCH NR: 0 265 960 015
BOSCH NR: 0 265 960 018
BOSCH NR: 0 265 960 019
BOSCH NR: 0 265 960 020
BOSCH NR: 0 265 960 023
BOSCH NR: 0 265 960 025
BOSCH NR: 0 265 960 028
Mercedes Benz cars have W211 and R230 with ABS SBC system , if using DAS test, the instruction as follows:
TIPS: CODE C249F, OPERATION TIME OF COMPONENT A7/3 IS EXCEEDED (SBC HYDRAULIC UNIT)
The above tips that show internal fault of control unit, you have to replace the SBC control module and using W211/R230 TOOL that can be easily repaired without replace the new control module.
Mercedes Benz's Safety Precautions had stated that before attempting to repair the brake system on
its models W211 (E Class) and R230 (SL Class), the Sensotronic Brake Control (SBC) system must be
deactivated first using its STAR-DIAGNOSIS tester.
Deactivation of the SBC system is absolutely necessary before carrying out any maintenance work on
the brakes like changing of pads, discs and fluids because the system is under a pressure of 140
bars. Mechanics who perform brake services on these car models must have the proper tools to avoid
the risk of injuries to themselves and damage to the brake system.
Until the introduction of this inexpensive, convenient, light, safe and easy to use SBC tool is
another alternative to the STAR-DIAGNOSIS tester when working on SBC system. It can perform the
tasks equally well which is efficient and safety.
After the repair had done, the SBC system can be activated and restore back its pressure. The Error memory is erased automatically.
- Quick, easy operations with LED indications.
- Safe to use
- Power ON when plugged into vehicle?s OBDII diagnostic connector.
- Light, compact and very convenient.
- Stand alone unit.
This SBC tool works on Mercedes Benz W211 (E-Class) and R230 (SL-Class) with SBC systems.
It is ideally suited for:
- Brake centers
- Independent Mercedes Benz workshops
- Tire Service centers
- Service garages
- Quick service centers
- Mercedes Benz Specia list centers
- Automotive Repair Workshops
1. Host: 1PCS
2. OBD-11 connector: 1PCS
3. Product Description CD: 1PCS
NOTE: Can not support MB211, MB220 and CDI 2002
Use follow these steps:
1. An OBD BENZ SBC TOOL 16PIN connector into the vehicle's OBD-11 communications port;
2. Turn the ignition switch to ON, then OBD BENZ SBC TOOL power light lit, and the device will call and the second tone, said the device is working properly;
3. And then need to restore the maintenance mode switch (25% -50% -75% -100% can be selected) at this time there will be frequency BUSY indicator light, and the device will beep tones, 10 seconds to complete data recovery, whichAlways when the BUSY indicator.
Our service commitment:
- Lowest price
- Stringent quality tests
- Professional technical support
- 2 years warranty