odometer correction programmer,
ecu programming tool
R270 BMW CAS4 BDM Programmer, Odometer Correction Tool to program Motorola MCU
Directly read and write chip data quickly and safely, support for the new 2009 7 Series (F01/F02) CAS4 odometer and chips read and write data ,safe and effective.
CAS4 includes all the features of CAS3 programmer. It has a powerful Motorola MCU programming function: removing-free program Motorola MCU EEPROM (HC908) and FLASH (HC912, HC9S12, HC9S12X) series.
1.Support BMW CAS and CAS4 (0K50E/2K79X/0L01Y/0L15Y/1L15Y, etc.)
2.Support BMW EWS4 (2L86D)
3.Support Benz EZS (1J35D/2J74Y/4J74Y/3K91D/1L85D/1L59W/3L40K/4L 40K, etc.)
4.Supports a variety of SRS modules:(9H91F/0K13J/0K75F/0L85D/0J38M/1E62H/1K7 9X/5H55W, etc.)
5.Support the M35080 series of quick clear, read and write (35080/35080-V6/35080-VP/D80 D0WQ/D160/35160, etc.)
6.Applicable to all kinds of EIS/CAS/SRS/ECU automotive modules.
1x R270 main unit
1x 26pin cable
1x AC Adapter
1x USB Cable
1x CD drive
I bought a R70 to program a M35080v6 eeprom, the tool show:
Read m35080v6.......... Send command to R270......wait.....
Send setting to device.................... For 30 minutes and it cannot read the mileage data.
As the product description in our website, R270 supports the M35080 series of quick clear, read and write (35080/35080-V6/35080-VP/D80 D0WQ/D160/35160, etc.). Therefore, if you fail to use R270 to work with M35080 eeprom, firstly you have to remove M35080 chip and then plug it into the IC socket, this IC socket is designed for M35080 eeprom. Beside, you need to check if it is well-welded with the board? If not well-welded, it means poor communication, then it can’t quick clear and read the mileage data.
Let's see which part is the IC socket: